ElpiAuto

Wheel fitment · Dodge

D Dodge Charger — Bolt Pattern

The LX/LD-generation Charger (2005-2024, the Chrysler 300/Challenger-related sedan) used 5×115 on a 71.6 mm hub with M14×1.5 studs; the all-new STLA Large-platform Charger (2024 on) keeps the same 71.6 mm hub but widens to 5×127 with finer M12×1.5 studs.

✓ Reviewed 2026-09-18

VI (LX)2005–2010
Bolt pattern5x115Centre bore (DIA)71.6 mmThreadM14x1.5Offset (ET)ET14–29
VII (LD)2011–2014
Bolt pattern5x115Centre bore (DIA)71.6 mmThreadM14x1.5Offset (ET)ET14–55

Wide spread by wheel size: 17–21" factory wheels run ET14–29, and one 19" 7.5J wheel is listed at ET55 — read the offset stamped on your own wheel.

VII (LD) facelift2015–2023
Bolt pattern5x115Centre bore (DIA)71.6 mmThreadM14x1.5Offset (ET)ET-12.5–55

Wide spread by wheel size: 17–20" factory wheels are ET24–28.5, a 19" 7.5J is listed at ET55, and the widest 10J×21 wheel goes to ET-12.5.

VIII (LB)2024–now
Bolt pattern5x127Centre bore (DIA)71.6 mmThreadM12x1.5Offset (ET)ET0–66

Factory wheels are listed from ET0 (8.5–9.5J×18) to ET66 (10J×20) — read the offset stamped on your own wheel.

Trims and markets vary — verify against your own wheel or the owner's handbook before buying.

Will a wheel fit?

This Dodge Charger is 5×127, 71.6 mm hub.

The wheel you are checking
×

Don't know the wheel's own pattern? Measure it →

Loading…
Useful? Share it with someone who's picking tires or wheels.

More tire calculators

Tire Size CalculatorDecode one size, see what else fits the wheelTire Size ComparisonTwo sizes side by side, with the speedometer effectTire Size ConverterWrite any size in metric or inch notationWheel Offset CalculatorPoke, strut clearance and backspacing for a new wheelTire Pressure Converterpsi, kPa and bar — with a placard chartFuel Cost CalculatorTrip cost and consumption in mpg, L/100km, km/LSpeedometer Error CalculatorHow far off the dial reads after a tire size changeTire Stretch CalculatorHow stretched a tire sits on a given wheel width

Common questions

What bolt pattern does the Dodge Charger have?

The LX/LD-generation Charger (2005-2024, the Chrysler 300/Challenger-related sedan) used 5×115 on a 71.6 mm hub with M14×1.5 studs; the all-new STLA Large-platform Charger (2024 on) keeps the same 71.6 mm hub but widens to 5×127 with finer M12×1.5 studs. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.

Will other wheels fit my Charger?

Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.

What is the centre bore on a Charger?

71.6 mm on the current car — earlier generations may differ, see the table. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.

Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.