ElpiAutoWheel fitment · Chrysler
C Chrysler Pacifica — Bolt Pattern
The current minivan (2016–present, RU) is 5×127 with a 71.5 mm hub and M12×1.5 bolts — note the thinner M12 thread, unlike some Stellantis SUVs on the same 5×127 pattern that use M14.
✓ Reviewed 2026-09-17
Wheel size OE 7J×17 ET50 · up to 7.5J×18 ET50 (US-spec)
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Chrysler Pacifica is 5×127, 71.5 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Chrysler Pacifica have?
The current minivan (2016–present, RU) is 5×127 with a 71.5 mm hub and M12×1.5 bolts — note the thinner M12 thread, unlike some Stellantis SUVs on the same 5×127 pattern that use M14. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Pacifica?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Pacifica?
71.5 mm on the current car. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.