ElpiAutoWheel fitment · Fiat
F Fiat 500 — Bolt Pattern
The modern 500 (2007 on, both pre- and post-facelift) is 4×98 with a 58.1 mm hub and M12×1.25 wheel bolts — a fairly unusual pattern outside the Fiat/Alfa Romeo family.
✓ Reviewed 2026-09-12
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Fiat 500 is 4×98, 58.1 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Fiat 500 have?
The modern 500 (2007 on, both pre- and post-facelift) is 4×98 with a 58.1 mm hub and M12×1.25 wheel bolts — a fairly unusual pattern outside the Fiat/Alfa Romeo family. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my 500?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a 500?
58.1 mm on the current car. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.