ElpiAuto4x98 Bolt Pattern
4 studs on a 98 mm circle — also written 4×3.86″. Used by 4 models in our database.
Vehicles with this pattern
Specs for 4x98
| Thread | M12x1.25 |
|---|---|
| Centre bore seen on these cars | 58.1–58.6 mm |
Every 4x98 generation in our database uses cone-seat bolts.
Centre bore varies by model even within the same 4x98 pattern — use a hub-centric ring rather than assuming a universal fit.
Does NOT interchange with
| Pattern | Difference |
|---|---|
| 4x100 | 2.0 mm |
Close on paper, not close enough on a hub — these need a proper adapter, never a "one hole off" force-fit.
Common questions
What does 4x98 mean?
4 studs, on a circle 98 mm in diameter — that circle is the pitch circle diameter (PCD). 4x98 is also written 4×3.86″.
What fits a 4x98 hub?
Only another 4x98 wheel. Bolt pattern has no working tolerance — even a pattern a couple of millimetres off will not seat properly. A different pattern needs a proper bolt-on adapter, not a "close enough" wheel.