ElpiAutoWheel fitment · Chevrolet
Chevrolet Traverse — Bolt Pattern
An unusual 6-lug crossover fitment: the first-generation Traverse (2009-2017, Lambda platform) used 6×132 on a 74.5 mm hub, while every generation since (2018 on) switched to 6×120 on a smaller 66.9 mm hub. M14×1.5 studs throughout.
✓ Reviewed 2026-09-13
Wheel size OE 7.5J×17 ET50 · up to 7.5J×20 ET50 (US-spec)
Wheel size OE 6.5J×17 ET50 · up to 9J×19 ET40 (US-spec)
Trims and markets vary — verify against your own wheel or the owner's handbook before buying.
Will a wheel fit?
This Chevrolet Traverse is 6×120, 66.9 mm hub.
Don't know the wheel's own pattern? Measure it →
Common questions
What bolt pattern does the Chevrolet Traverse have?
An unusual 6-lug crossover fitment: the first-generation Traverse (2009-2017, Lambda platform) used 6×132 on a 74.5 mm hub, while every generation since (2018 on) switched to 6×120 on a smaller 66.9 mm hub. M14×1.5 studs throughout. Check the table above for your exact generation, and confirm against a wheel or the owner's handbook before buying.
Will other wheels fit my Traverse?
Only wheels with exactly the same bolt pattern — bolt pattern has no working tolerance. The centre bore must also be equal to or larger than the hub (a larger bore just needs spigot rings). A different pattern needs bolt-on adapters, which also push the wheel outward and change the track.
What is the centre bore on a Traverse?
66.9 mm on the current car — earlier generations may differ, see the table. The bore is the hole in the middle of the wheel; it has to clear the hub spigot or sit on a spigot ring.
Bolt pattern is only part of fitment. The offset (ET) decides where the wheel sits in the arch — work that out with the wheel offset calculator. For tyre sizing on a new wheel width, use the tire size calculator.