ElpiAuto285/75R16 vs 315/75R16
315/75R16 is 5.4% taller (45 mm) than 285/75R16 — outside the ±3% swap band.
Two sizes
Also accepts 35X12.50R17 and 31x10.5-15.
Both sizes, drawn to scale
1 grid = 1 inWhat each number means
The two size codes broken down — which digit is which, and what it does on the car.
Size A — 285/75R16
- 285section width11.2″ across the tread, sidewall to sidewall
- 75aspect ratiosidewall is 75% of the width — 8.4″ tall
- Rconstructionradial — standard on every modern road car
- 16wheel diametermounts on a 16-inch wheel
In flotation sizing: ≈ 32.8x11.2R16
Size B — 315/75R16
- 315section width12.4″ across the tread, sidewall to sidewall
- 75aspect ratiosidewall is 75% of the width — 9.3″ tall
- Rconstructionradial — standard on every modern road car
- 16wheel diametermounts on a 16-inch wheel
In flotation sizing: ≈ 34.6x12.4R16
285/75R16 vs 315/75R16, measurement by measurement
Every dimension in inches, with the difference and which size is bigger
| Measurement | 285/75R16 | 315/75R16 | Difference | % |
|---|---|---|---|---|
| Overall diameter | 32.83″ | 34.60″ | +1.77″ | +5.4% |
| Section width | 11.22″ | 12.40″ | +1.18″ | +10.5% |
| Sidewall height | 8.42″ | 9.30″ | +0.89″ | +10.5% |
| Circumference | 103.14″ | 108.71″ | +5.57″ | +5.4% |
| Revs per mile | 614.3 | 582.9 | −31.5 | −5.1% |
| Revs per km | 381.7 | 362.2 | −19.5 | −5.1% |
| Approved rim width estimate | 8.5–11″ | 9.5–12″ | — | — |
Overall diameter is the controlling number — clearance, gearing, speedometer accuracy and odometer reading all follow from it. Revs per mile/km is what your ABS, speedometer and odometer actually count.
What changes on the road
Direction and rough size of each effect going from 285/75R16 to 315/75R16. Geometry only — real tires vary by brand and compound.
Speedometer & odometer error
What changes on the dash when the overall diameter changes.
A speedometer doesn't measure distance. It counts how fast the wheels turn and multiplies by a fixed factory number for tire circumference. Change the tire and that factory number is now wrong.
Going to a bigger tire, each turn covers more ground, so at a true 63.2 mph the wheels spin at the rate the factory calls 60. The dial reads low — you are speeding without knowing it. A smaller tire does the opposite, and the odometer also over-counts miles you didn't drive.
Over 10,000 indicated miles, this change means the odometer under-counts by roughly 512 miles.
| Speedometer reads | True speed on 315/75R16 | Error |
|---|---|---|
| 20 mph | 21.1 mph | +1.1 |
| 30 mph | 31.6 mph | +1.6 |
| 40 mph | 42.2 mph | +2.2 |
| 50 mph | 52.7 mph | +2.7 |
| 60 mph | 63.2 mph | +3.2 |
| 70 mph | 73.8 mph | +3.8 |
| 80 mph | 84.3 mph | +4.3 |
With 285/75R16 as the original size. A taller tire makes the dial read low — the gap grows with speed.
Reading this comparison
The overall diameter is what matters here: 315/75R16 is the taller tire. It sets ride height, gearing and how far the tire travels per revolution — which is what the speedometer and odometer count. Width and sidewall change fit and feel (a wider tire needs a wider wheel and more clearance; a shorter sidewall sharpens steering) but not the gearing.
Figures are geometric estimates from the size codes; real moulded tires vary by brand by 1–3%. Confirm load rating, wheel width and physical clearance on your vehicle before fitting. To compare any other two sizes, use the tire size comparison tool; to decode one size and see what else fits its wheel, the tire size calculator.