ElpiAuto285/65R18 vs 295/65R18
295/65R18 is 0.51″ (13 mm) taller than 285/65R18, a 1.6% difference in overall diameter — right at the edge of the ±3% band — fine on most cars, but check clearance at full lock and full suspension compression.
| Measurement | 285/65R18 | 295/65R18 | Difference | % |
|---|---|---|---|---|
| Overall diameter | 32.59″ | 33.10″ | +0.51″ | +1.6% |
| Section width | 11.22″ | 11.61″ | +0.39″ | +3.5% |
| Sidewall height | 7.29″ | 7.55″ | +0.26″ | +3.5% |
| Circumference | 102.37″ | 103.98″ | +1.61″ | +1.6% |
| Revs per mile | 618.9 | 609.3 | −9.6 | −1.5% |
| Revs per km | 384.6 | 378.6 | −5.9 | −1.5% |
Speedometer: with 285/65R18 as the original, 295/65R18 makes an indicated 60 mph really about 60.9 mph, and the axle sits ~0.26″ higher.
Reading this comparison
The overall diameter is what matters here: 295/65R18 is the taller tire. It sets ride height, gearing and how far the tire travels per revolution — which is what the speedometer and odometer count. Width and sidewall change fit and feel (a wider tire needs a wider wheel and more clearance; a shorter sidewall sharpens steering) but not the gearing.
Figures are geometric estimates from the size codes; real moulded tires vary by brand by 1–3%. Confirm load rating, wheel width and physical clearance on your vehicle before fitting. To compare any other two sizes, use the tire size comparison tool; to decode one size and see what else fits its wheel, the tire size calculator.