ElpiAuto265/70R18 vs 295/65R18
295/65R18 is 0.49″ (12 mm) taller than 265/70R18, a 1.5% difference in overall diameter — right at the edge of the ±3% band — fine on most cars, but check clearance at full lock and full suspension compression.
| Measurement | 265/70R18 | 295/65R18 | Difference | % |
|---|---|---|---|---|
| Overall diameter | 32.61″ | 33.10″ | +0.49″ | +1.5% |
| Section width | 10.43″ | 11.61″ | +1.18″ | +11.3% |
| Sidewall height | 7.30″ | 7.55″ | +0.25″ | +3.4% |
| Circumference | 102.44″ | 103.98″ | +1.55″ | +1.5% |
| Revs per mile | 618.5 | 609.3 | −9.2 | −1.5% |
| Revs per km | 384.3 | 378.6 | −5.7 | −1.5% |
Speedometer: with 265/70R18 as the original, 295/65R18 makes an indicated 60 mph really about 60.9 mph, and the axle sits ~0.25″ higher.
Reading this comparison
The overall diameter is what matters here: 295/65R18 is the taller tire. It sets ride height, gearing and how far the tire travels per revolution — which is what the speedometer and odometer count. Width and sidewall change fit and feel (a wider tire needs a wider wheel and more clearance; a shorter sidewall sharpens steering) but not the gearing.
Figures are geometric estimates from the size codes; real moulded tires vary by brand by 1–3%. Confirm load rating, wheel width and physical clearance on your vehicle before fitting. To compare any other two sizes, use the tire size comparison tool; to decode one size and see what else fits its wheel, the tire size calculator.