ElpiAuto275/55R20 vs 285/55R20
285/55R20 is 1.4% taller (11 mm) than 275/55R20 — well inside the ±3% swap band.
Two sizes
Also accepts 35X12.50R17 and 31x10.5-15.
Both sizes, drawn to scale
1 grid = 1 inWhat each number means
The two size codes broken down — which digit is which, and what it does on the car.
Size A — 275/55R20
- 275section width10.8″ across the tread, sidewall to sidewall
- 55aspect ratiosidewall is 55% of the width — 6.0″ tall
- Rconstructionradial — standard on every modern road car
- 20wheel diametermounts on a 20-inch wheel
In flotation sizing: ≈ 31.9x10.8R20
Size B — 285/55R20
- 285section width11.2″ across the tread, sidewall to sidewall
- 55aspect ratiosidewall is 55% of the width — 6.2″ tall
- Rconstructionradial — standard on every modern road car
- 20wheel diametermounts on a 20-inch wheel
In flotation sizing: ≈ 32.3x11.2R20
275/55R20 vs 285/55R20, measurement by measurement
Every dimension in inches, with the difference and which size is bigger
| Measurement | 275/55R20 | 285/55R20 | Difference | % |
|---|---|---|---|---|
| Overall diameter | 31.91″ | 32.34″ | +0.43″ | +1.4% |
| Section width | 10.83″ | 11.22″ | +0.39″ | +3.6% |
| Sidewall height | 5.95″ | 6.17″ | +0.22″ | +3.6% |
| Circumference | 100.25″ | 101.61″ | +1.36″ | +1.4% |
| Revs per mile | 632.0 | 623.6 | −8.5 | −1.3% |
| Revs per km | 392.7 | 387.5 | −5.3 | −1.3% |
| Approved rim width estimate | 8–10.5″ | 8.5–11″ | — | — |
Overall diameter is the controlling number — clearance, gearing, speedometer accuracy and odometer reading all follow from it. Revs per mile/km is what your ABS, speedometer and odometer actually count.
What changes on the road
Direction and rough size of each effect going from 275/55R20 to 285/55R20. Geometry only — real tires vary by brand and compound.
Speedometer & odometer error
What changes on the dash when the overall diameter changes.
A speedometer doesn't measure distance. It counts how fast the wheels turn and multiplies by a fixed factory number for tire circumference. Change the tire and that factory number is now wrong.
Going to a bigger tire, each turn covers more ground, so at a true 60.8 mph the wheels spin at the rate the factory calls 60. The dial reads low — you are speeding without knowing it. A smaller tire does the opposite, and the odometer also over-counts miles you didn't drive.
Over 10,000 indicated miles, this change means the odometer under-counts by roughly 134 miles.
| Speedometer reads | True speed on 285/55R20 | Error |
|---|---|---|
| 20 mph | 20.3 mph | +0.3 |
| 30 mph | 30.4 mph | +0.4 |
| 40 mph | 40.5 mph | +0.5 |
| 50 mph | 50.7 mph | +0.7 |
| 60 mph | 60.8 mph | +0.8 |
| 70 mph | 71.0 mph | +1.0 |
| 80 mph | 81.1 mph | +1.1 |
With 275/55R20 as the original size. A taller tire makes the dial read low — the gap grows with speed.
Reading this comparison
The overall diameter is what matters here: 285/55R20 is the taller tire. It sets ride height, gearing and how far the tire travels per revolution — which is what the speedometer and odometer count. Width and sidewall change fit and feel (a wider tire needs a wider wheel and more clearance; a shorter sidewall sharpens steering) but not the gearing.
Figures are geometric estimates from the size codes; real moulded tires vary by brand by 1–3%. Confirm load rating, wheel width and physical clearance on your vehicle before fitting. To compare any other two sizes, use the tire size comparison tool; to decode one size and see what else fits its wheel, the tire size calculator.