ElpiAuto265/70R18 vs 325/60R18
325/60R18 is 0.75″ (19 mm) taller than 265/70R18, a 2.3% difference in overall diameter — right at the edge of the ±3% band — fine on most cars, but check clearance at full lock and full suspension compression.
| Measurement | 265/70R18 | 325/60R18 | Difference | % |
|---|---|---|---|---|
| Overall diameter | 32.61″ | 33.35″ | +0.75″ | +2.3% |
| Section width | 10.43″ | 12.80″ | +2.36″ | +22.6% |
| Sidewall height | 7.30″ | 7.68″ | +0.37″ | +5.1% |
| Circumference | 102.44″ | 104.79″ | +2.35″ | +2.3% |
| Revs per mile | 618.5 | 604.7 | −13.9 | −2.2% |
| Revs per km | 384.3 | 375.7 | −8.6 | −2.2% |
Speedometer: with 265/70R18 as the original, 325/60R18 makes an indicated 60 mph really about 61.4 mph, and the axle sits ~0.37″ higher.
Reading this comparison
The overall diameter is what matters here: 325/60R18 is the taller tire. It sets ride height, gearing and how far the tire travels per revolution — which is what the speedometer and odometer count. Width and sidewall change fit and feel (a wider tire needs a wider wheel and more clearance; a shorter sidewall sharpens steering) but not the gearing.
Figures are geometric estimates from the size codes; real moulded tires vary by brand by 1–3%. Confirm load rating, wheel width and physical clearance on your vehicle before fitting. To compare any other two sizes, use the tire size comparison tool; to decode one size and see what else fits its wheel, the tire size calculator.