ElpiAuto325/60R20 vs 35X12.50R20
35X12.50R20 is 0.35″ (9 mm) shorter than 325/60R20, a 1.0% difference in overall diameter — comfortably inside the ±3% band most fitment guides use, so it swaps straight across for gearing and the speedometer.
| Measurement | 325/60R20 | 35X12.50R20 | Difference | % |
|---|---|---|---|---|
| Overall diameter | 35.35″ | 35.00″ | −0.35″ | −1.0% |
| Section width | 12.80″ | 12.50″ | −0.30″ | −2.3% |
| Sidewall height | 7.68″ | 7.50″ | −0.18″ | −2.3% |
| Circumference | 111.07″ | 109.96″ | −1.11″ | −1.0% |
| Revs per mile | 570.5 | 576.2 | +5.8 | +1.0% |
| Revs per km | 354.5 | 358.1 | +3.6 | +1.0% |
Speedometer: with 325/60R20 as the original, 35X12.50R20 makes an indicated 60 mph really about 59.4 mph, and the axle sits ~0.18″ lower.
Reading this comparison
The overall diameter is what matters here: 325/60R20 is the taller tire. It sets ride height, gearing and how far the tire travels per revolution — which is what the speedometer and odometer count. Width and sidewall change fit and feel (a wider tire needs a wider wheel and more clearance; a shorter sidewall sharpens steering) but not the gearing.
Figures are geometric estimates from the size codes; real moulded tires vary by brand by 1–3%. Confirm load rating, wheel width and physical clearance on your vehicle before fitting. To compare any other two sizes, use the tire size comparison tool; to decode one size and see what else fits its wheel, the tire size calculator.