ElpiAuto305/55R20 vs 325/60R20
325/60R20 is 2.15″ (55 mm) taller than 305/55R20, a 6.5% difference in overall diameter — outside the ±3% band, so expect the speedometer to drift and check for rubbing before fitting.
| Measurement | 305/55R20 | 325/60R20 | Difference | % |
|---|---|---|---|---|
| Overall diameter | 33.21″ | 35.35″ | +2.15″ | +6.5% |
| Section width | 12.01″ | 12.80″ | +0.79″ | +6.6% |
| Sidewall height | 6.60″ | 7.68″ | +1.07″ | +16.2% |
| Circumference | 104.33″ | 111.07″ | +6.74″ | +6.5% |
| Revs per mile | 607.3 | 570.5 | −36.9 | −6.1% |
| Revs per km | 377.4 | 354.5 | −22.9 | −6.1% |
Speedometer: with 305/55R20 as the original, 325/60R20 makes an indicated 60 mph really about 63.9 mph, and the axle sits ~1.07″ higher.
Reading this comparison
The overall diameter is what matters here: 325/60R20 is the taller tire. It sets ride height, gearing and how far the tire travels per revolution — which is what the speedometer and odometer count. Width and sidewall change fit and feel (a wider tire needs a wider wheel and more clearance; a shorter sidewall sharpens steering) but not the gearing.
Figures are geometric estimates from the size codes; real moulded tires vary by brand by 1–3%. Confirm load rating, wheel width and physical clearance on your vehicle before fitting. To compare any other two sizes, use the tire size comparison tool; to decode one size and see what else fits its wheel, the tire size calculator.